The Miele DSM 400 can be used to
combine the rangehood with other
components.
Follow the installation instructions
suppled.
Warning: Failure to install the screws or
fixing device in accordance with the
instructions may result in electrical
hazards.
It enables the following:
Potential free connection
This is used for controlling another
appliance with the help of the
rangehood's On/Off button s.
If in any doubt, the advice of a
competent builder must be sought.
Connection to a light switch
The control module can be used to
switch on the rangehood lighting via a
light switch in the house.
Installation
The control module must be installed
above the rangehood housing.
All electrical work must be carried
out by a competent, qualified
electrician.
Operation with control module DSM 400
37
To Next Page
Loading...
