Changing a halogen lamp
^
Before any cleaning or maintenance
work, disconnect the rangehood from
the mains supply. Ensure that:
–
it is switched off at the isolator, or
–
it is switched off at the wall socket
and the plug is withdrawn, or
–
the mains fuse is disconnected, or
–
the screw-out fuse is removed (in
countries where this is applicable).
,
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Let
them cool down before you change
them.
^
First remove the grease filters from
the rangehood.
^
Now turn the thumb screw
anti-clockwise. This releases the
halogen lamp partially from its
housing.
^
Turn the halogen lamp anti-clockwise
and pull it downwards to remove.
Replace with a halogen lamp of the
same specification:
GU/GZ 10, 230 V, 50 W.
^
Fit the new halogen lamp by
reversing the above procedure.
Please follow the manufacturer's
instructions.
^
Replace the grease filters.
Cleaning and care
19
To Next Page
Loading...
