The Miele DSM 400 control module can
be used to combine the rangehood with
other components.
It enables the following:
Potential free connection
This is used for controlling another
appliance with the help of the
rangehood's On/Off button s.
The potential free contact of the
DSM 400 a can be installed in an
...EXT model, for instance, which is
connected to a central extraction
system.
The contact can be used to activate a
motorised shut-off flap b which is
installed before the central extraction
system c.
The components of the central
extraction system are not supplied as
standard by Miele.
If in any doubt, the advice of a
competent builder must be sought.
Connection to a light switch
The control module can be used to
switch on the rangehood lighting via a
light switch in the house.
Installation
The tower needs to be removed before
the control module can be fitted to the
motor unit.
Operation with Control module DSM 400
30
To Next Page
Loading...
