Installation
*INSTALLATION*
38
Before installation
Before installation, it is important
to read the information given on the
following pages as well as the
“Warning and Safety instructions” at
the beginning of this booklet.
Protective foil
The housing components have
protective foil around them to prevent
them from transport damage.
Please remove this foil before fitting
the housing components. It can be
peeled off easily.
Installation materials
1 exhaust connection
for exhaust ducting 150mm.
1 non-return flap
for fitting into the exhaust connection
on the motor unit (not needed for
recirculation mode). Depending on
model, the non-return flap may already
be fitted.
Telescopic wall bracket
for securing the rangehood to the wall
To Next Page
Loading...
