The two sides of the cooker hood can
be operated independently of one
another.
To switch a fan on
^
Press the On/Off control.
The fan runs at power level "II".
The indicator lamp will come on.
If the cooker hood has been
connected to a window contact
switch via two Miele DSM 400
control modules, then the fans
cannot be switched on if the window
is shut. The indicator lamps will
flash.
To select a power level
^
Use the – / + controls to select the
power level required.
+ control = higher setting
– control = lower setting
Depending on the intensity of cooking
vapours, levels "I" to "III" (green
indicator lamps) are usually sufficient
for normal cooking.
Intensive setting
When frying or cooking food with a
strong aroma, you may wish to select
the Intensive setting, level IV (yellow
indicator lamp), for a short period.
Automatic switch-off of the Intensive
setting
You can set the Intensive setting so that
it only runs for 10 minutes before
reverting automatically to level III.
^
To set this option, both the fan and the
hob lighting must be switched off.
^ Press the run-on option control for
approx. 10 seconds. The first fan
power setting indicator will light up.
^ Then press in turn,
–
the hob lighting control,
–
the – control, and
–
the hob lighting control again.
Operation
13
To Next Page
Loading...
