Installation
41
Before installation
Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
Assembly parts
4 screws, 7 x 110 mm and
4 plugs, 10 x 80 mm
for securing the cooker hood to the
ceiling
The plugs meet European technical
requirements for use in concrete
ceilings.
They must only be used together
with 7 x 110 mm screws. For other
types of ceiling construction,
alternative fixings will be required.
Make sure the ceiling is able to take
the weight of the cooker hood.
4 extension piece holders
for aligning and securing the telescopic
extension piece
4 screws M4 x 8.5 mm
for securing the extension piece
holders
14 screws M4 x 8 mm
for securing the spacer frame and
securing the cooker hood to the
installation frame
1 screw M4 x 16 mm
for securing the tower
DUI 32 conversion kit for
recirculation mode
(not supplied, available as an optional
accessory). The kit includes a
directional unit, aluminium hose and
hose clips.
To Next Page
Loading...
