Installation
45
Draw two intersecting lines on the
ceiling.
With extraction mode:
– Place a section of the exhaust
ducting in the ceiling and feed it
down through the cross-sectional
area as illustrated. Exhaust ducting of
approx. 700 mm length is required
between the ceiling and the cooker
hood exhaust socket.
– Secure the exhaust ducting to the
exhaust socket, e.g. with a hose clip
(available as an optional accessory)
on flexible ducting.
Place the mains cable and for ...EXT
models, the connection cable to the
external motor in the ceiling and
guide them through the ceiling in the
area shown. A mains cable of approx.
700 mm in length is required between
the ceiling and the cooker hood
connectors.
To Next Page
Loading...
