Installation
52
A non-return flap is supplied with the
cooker hood or is already fitted in the
exhaust socket (depending on cooker
hood version).
With extraction mode / external motor
(AL, EXT) fit the non-return flap in the
exhaust socket if your ducting system
is not equipped with one.
Recirculation mode (UL) does not
require the non-return flap to be
fitted. If there is one present, it should
be removed.
Hang the cooker hood on the
brackets, making sure that the
controls are at the front.
Secure the cooker hood with the
screws supplied.
To Next Page
Loading...
