Miele DAD 4940 User Manual

Warning and Safety instructions
8
 For safety reasons, this appliance may only be used after it has
been built in.
 The cooker hood must not be used in a non-stationary location
(e.g. on a ship).
 Touching electrical components and tampering with electrical and
mechanical parts is highly dangerous to the user and can cause
operational faults.
Only open the housing as described in the instructions given in the
installation sheet and in the Cleaning and care section of this
booklet. Under no circumstances should any other parts of the
housing be opened.
 The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele authorised technician.
 If the electrical connection cable is faulty it must only be replaced
by a Miele authorised technician to protect the user from danger.
 The lamps are a built-in component of the lighting. Replacement
lamps may only be fitted by a Miele authorised technician or by the
Miele Customer Service Department.
 During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply.

Miele DAD 4940 Specifications

General

Type	Downdraft
Timer	Yes
Cord length	1.5 m
Control type	Buttons, Wireless
Product color	Black
Built-in display	-
Exhaust connection diameter	150 mm
Noise level	62 dB
Number of speeds	3
Type of extraction	Ducted/Recirculating
Noise level (low speed)	44 dB
Maximum extraction power	440 m³/h
Noise level (medium speed)	57 dB
Maximum recirculating power	415 m³/h
Noise level (intensive speed)	70 dB
Fluid dynamic efficiency class	A
Noise level (recirculation mode)	69 dB
Grease filtering efficiency class	B
Current	10 A
Connected load	250 W
AC input voltage	230 V
AC input frequency	50 Hz
Energy efficiency scale	A+++ to D
Annual energy consumption	41.6 kWh
Grease filter type	Metal
Bulb type	LED
Bulb power	11.2 W
Illuminance	400 lx
Number of bulbs	1 bulb(s)

Weight and Dimensions

Depth	170 mm
Width	936 mm
Weight	34000 g