Miele DGC 7340 HC Pro User Manual

Operation
54
Cleaning the combination steam
oven after a cooking process
 Remove the water container and con-
densate container and empty them as
required.
 Switch the combination steam oven
off.
Appliance rinsing appears after a cooking
process involving steam.
 Follow the instructions on the display.
The rinsing process should be car-
ried out every time to flush any re-
maining food deposits out of the sys-
tem.
 Clean and dry the whole combination
steam oven as described in “Cleaning
and care”.
 Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
programme, a tone will sound and the
display will prompt you to refill the con-
tainer with fresh water.
 Take out the water container and re-
plenish the water.
 Push the water container into the ap-
pliance.
The cooking programme is resumed.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can use the sensor control to
change the values or settings for this
programme.
 Select the sensor control.
Depending on the function, the follow-
ing settings appear:
- Temperature
- Moisture
- Duration
- Booster
- Pre-heat
- Crisp function
Changing values and settings
 Select the desired value or setting
and confirm withOK.
 Change the value or setting and con-
firm withOK.
The cooking programme will restart with
the new values and settings.

Miele DGC 7340 HC Pro Specifications

General

Brand	Miele
Model	DGC 7340 HC Pro
Category	Oven
Language	English