Cleaning and care
167
Hold the door on either side and
evenly pull diagonally upwards from
the hinge retainers.
Make sure that the door is straight.
Place the door on the previously
prepared surface.
Fitting the door
Hold the door securely on both sides
and carefully fit it back onto the door
hinge retainers.
Make sure that you put the door back
on straight.
Open the door fully.
If the locking clamps are not locked,
the door could work loose, resulting
in damage.
Ensure that the locking clamps are
locked after refitting the door.
To relock the locking clamps, flip
them back up to the horizontal
position as far as they will go.
To Next Page
Loading...
