Electrical connection
51
Disconnecting from the mains
Danger of electric shock.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:
Safety fuses
Completely remove fuses
Automatic circuit breakers
Press the (red) button until the middle
(black) button springs out.
Built-in circuit breakers
Circuit breakers typeB orC:
Switch the on/off switch from 1 (on)
to 0 (off).
Residual current device (RCD)
(Residual current circuit breaker)
Switch the main switch from 1(on) to
0(off) or press the test button.
Replacing the mains connec-
tion cable
If the mains cable needs to be replaced
it must be replaced with a special con-
nection cable, type H05VV-F (PVC-in-
sulated), available from Miele.
To Next Page
Loading...
