EasyManua.ls Logo

Miele F 31202 Ui - Cleaning the Door Seal; Cleaning the Ventilation Gaps; After Cleaning

Miele F 31202 Ui
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and care
36
Cleaning the door seal
If the door seal is damaged or has
slipped out of its groove, the appli-
ance door may not close properly
and cooling performance will be re-
duced. As a result, condensate will
build up in the interior cabinet and
this can cause a build-up of ice.
Do not damage the door seal and
ensure it does not slip out of its
groove.
Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned reg-
ularly with clean water and then
wiped dry with a cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the en-
ergy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).
After cleaning
Close the appliance door.
Switch the refrigeration appliance
back on.
Switch on the SuperFreeze function
so that the refrigeration appliance can
cool down quickly.
Once the temperature in the refrigera-
tion appliance is sufficiently low,
place the frozen food back in the
freezer drawers and put them back in
the refrigeration appliance.
Switch the SuperFreeze function off
again.

Table of Contents

Related product manuals