Installation
*INSTALLATION*
48
Ventilation takes place through a vent-
ilation grille in the refrigeration appli-
ance plinth.
Furniture door panel
–Gap
Depending on the style of kitchen fur-
niture, the thickness and edge radius of
the furniture door and the gap that runs
around the door, vertically and horizont-
ally, are specified.
It is essential to pay attention to the fol-
lowing:
If the gap between the refrigeration
appliance furniture door panel and the
adjoining housing unit door or wall on
the hinged side is too small, the appli-
ance door could collide with the ad-
joining housing unit door or wall when
opened.
It may be necessary to adjust the
size of this gap to suit the thickness
and edge radius of the appliance fur-
niture door.
Tip: This must be taken into considera-
tion when planning your kitchen and
when replacing an old refrigeration ap-
pliance with a new one to ensure the in-
stallation conditions required are met.
To Next Page
Loading...
