Installation
*INSTALLATION*
52
Preparing to change the door hinging
To change the door hinging, you will
need the following tools:
Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
Lift off the covers, and.
Slightly loosen screws and on
the hinges.
Push the appliance door outwards
and take it off its hinges.
Remove the screws completely
and loosely screw them in on the op-
posite side.
Remove the screws completely
and loosely screw them in on the op-
posite side.
To Next Page
Loading...
