At the end of a programme
The End indicator light will come on at
the end of the programme.
The dishwasher can now be opened
and unloaded (see “Unloading the
dishwasher”).
,
To prevent the risk of steam
damage to the worktop edging
above the dishwasher it is advisable
to leave the door closed until you are
ready to unload the crockery.
Alternatively you can open the door
fully until the crockery is cool
enough to unload. Do not leave the
door only partially open.
Switching off
At the end of a programme:
^ Switch the dishwasher off with the
On/Off button s.
The dishwasher will continue to use
electricity until the On/Off button s
is switched off.
If the dishwasher is not to be used for a
longer period of time, e. g. whilst on
holiday, the stopcock should be turned
off.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
^
First unload the lower basket, then
the upper basket and cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower
basket.
Operation
32
To Next Page
Loading...
Need help?
General
