To clean the inside of the filter, the flap
must be opened:
^ Press together the catches in the
direction of the arrows a as shown,
and open the filter b.
^ Rinse all the filters under running
water.
^ Then close the flap so that the catch
engages.
^
Replace the filter combination so that
it lies flat in the base of the wash
cabinet.
^ Then turn the handle clockwise to
lock the filter combination in place.
,
Take care when you are fitting
the filter combination that it is
secured in position correctly.
Otherwise coarse soil could get into
the circulation system and cause a
blockage.
Cleaning and care
38
To Next Page
Loading...
Need help?
General
