Checking the programmed water
hardness level
^
Switch the dishwasher off using the
K button.
^
Turn the programme selector to the
"12 o'clock" position.
^
Press the Start/Stop button J / M in,
and whilst holding it in switch the
dishwasher on using the K button.
Keep the J / M button pressed in
until the J / M indicator light comes
on.
^
Turn the programme selector to the
"3 o'clock" position.
The 8 programme sequence indicator
will flash the number of times which
corresponds to the water hardness
level which has been set (see chart).
^ Switch the dishwasher off using the
K button.
Before using for the first time
17
To Next Page
Loading...
