Turning on
^
Make sure the spray arms can rotate
freely.
^
Close the door.
^
Open the water supply, if it is closed.
^
Press the K button to turn the
dishwasher on.
The "Start / Stop" indicator light flashes
and the indicator of the last set
program lights up.
Selecting a program
Choose your program according to the
type of load and soiling.
See the "Program Guide" for more
information.
You can now select any additional
options if desired (see "Additional
Options").
Starting a program
^
Select the desired program with the
Program selection button.
The indicator light for the selected
program will come on.
^
Press the Start / Stop button.
The program starts. The "Start / Stop",
"Wash" indicators and the indicator of
the selected program come on.
Cancel a program only in the first
few minutes.
Otherwise important program steps
(e.g. the water softening) may be
interrupted.
Program sequence display
Once a program has been started the
current stage of the program is shown
in the program sequence display by the
indicator lights.
Use
28
To Next Page
Loading...
