Factory default
All settings can be reset to factory
default.
^
Press the K button to turn the
dishwasher off.
^
Press and hold the Start / Stop button
and turn the dishwasher on
simultaneously using the K button.
Keep the Start / Stop button pressed
for at least four seconds until the
"Start / Stop" indicator light comes on.
If it does not come on, start over.
^ Press the Program button 12 times.
The lower most program indicator
flashes once long and twice short.
The "Cleaning" progress indicator
shows whether a setting has been set
differently to the default setting.
–
"Cleaning" progress indicator flashes:
All values are set to the default
settings
–
"Cleaning" progress indicator is off:
At least one setting has been
changed.
^
Press the ''Start / Stop" button if you
wish to reset the dishwasher to the
default settings.
The setting is saved immediately.
^ Press the K button to turn the
dishwasher off.
Additional options
32
To Next Page
Loading...
