Interrupting a program
A program will be interrupted as soon
as the door is opened.
When the door is closed again, the
program will continue from where it was
interrupted.
,
Water in the dishwasher is hot.
Risk of scalding!
Only open the door if absolutely
necessary and be very careful.
Before closing the door again, leave
it slightly ajar for approx.
20 seconds. This will allow the
temperature in the wash cabinet to
settle. Then push the door firmly
shut until it clicks into place.
Changing a program
Do not change the program if the
detergent dispenser flap is already
open.
If a program has already started and
you wish to change it:
^
Open the door.
^
Press the K button to turn the
dishwasher off.
^
Press the K button to turn the
dishwasher back on.
^ Use the Program button to select the
desired program.
^ Close the door to start the program.
Use
36
To Next Page
Loading...
Need help?
General
