Miele G 5481 - Page 51

Options
51
After you have activated the timer, the
display and the indicator lights will
switch off after a few minutes to save
energy.
Press the button to switch the time
display back on again for a few
minutes.
 Open the door if you need to check
how long the timer has left to run.
The time up until the programme starts
can be seen counting down in the
display in hours for durations above
10hours, and in minutes for durations
below 10 hours.
At the end of the start delay period, the
programme selected will start
automatically. The time left will appear
in the time display and theTimer
indicator light will go out.
Starting a programme before the
time for the timer has elapsed:
A programme can be started before the
timer has elapsed.
Proceed as follows:
 Open the door.
 Switch the dishwasher off with the
button.
 Switch the dishwasher back on with
the button.
 Select the required programme.
 Start the programme by closing the
door.