Switching on
^ Make sure the spray arms are not ob-
structed.
^ Close the door.
^ Open the stopcock, if it is closed.
^ Press the "On/Off" button (13).
The "Start" indicator light (17) will flash.
Starting a programme
^ When selecting a programme, refer
to the programme chart at the end of
the operating instructions.
^ Turn the programme selector (16)
clockwise or anti-clockwise to the re-
quired programme.
^ If wished, you can select the addi-
tional function "Top Solo" now (see
section "Additional functions").
^
Press the "Start" button (17).
The programme cycle begins. The
"Start" (17) and "Wash/Rinse" (14) indi
-
cator lights come on.
Do not finish a programme prema
-
turely. Important programme stages
(e. g. reactivating the water softener)
could be omitted.
Operating the dishwasher
36
To Next Page
Loading...
