Programme sequence
indicator lights (14)
The "Wash/Rinse" indicator light comes
on in the pre-wash, main wash, interim
rinse and final rinse stages of a
programme.
The "Drying" indicator light
comes on
during the drying stage of a
programme.
The "End" indicator light
comes on
when the programme has finished.
At the end of a programme
A programme has finished when the
"End" indicator light comes on in the
programme sequence display (14).
The dishwasher can now be opened
and unloaded (see "Unloading the dish-
washer").
For safety’s sake it is advisable to al-
ways switch the dishwasher off if you
do not wish to start another programme
immediately.
Switching off
At the end of a programme:
^
Turn the programme selector (16) to
the "Stop" position.
The "End" indicator light (14) goes out
and the "Start" indicator light (17)
flashes.
^
Press the On/Off button (13).
The "Start" indicator light (17) goes out.
The dishwasher continues to use
electricity until switched off using the
"On/Off" button.
If the dishwasher is not to be used for a
longer period of time, e. g. whilst on
holiday, the stopcock should be turned
off.
Operating the dishwasher
37
To Next Page
Loading...
