Test standard: EN 50242 / IEC 704
Standard programme Economy with additional function "Top Solo"
for comparison tests
(energy label):
Note: The Universal Plus 55 ° programme for normal
soiling has increased wash and drying
results with shorter running times and
increased energy requirements.
Part load: 6 place settings
Amount of detergent: 20 g only
in compartment II.
Rinse aid dispensing: Setting 3 (approx. 3 ml)
Noise measurements: Before starting a programme to measure noise,
the dishwasher door must first be opened completely,
and then closed.
Doing this will automatically close the ventilation outlet
for the Turbothermic process.
Dishwashers with cutlery basket
Spoon inserts: Fit the two inserts on top of the cutlery basket
(see section on loading the dishwasher, spoon inserts)
Place three spoons at intervals in each insert
Upper basket
Lower basket
Comparison tests
64
To Next Page
Loading...
