Miele G 670 - Cleaning the Spray Arms

Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets.
The spray arms should be inspected
and cleaned regularly (approx. every 6
months).
To do this remove the spray arms as fol-
lows.
Take out the cutlery tray (if standard)
and unscrew the
top spray arm.
Lift up the middle spray arm b to en-
gage the tooth-wheel mechanism.
Then unscrew the spray arm
c.
Remove the lower basket and take
out the
lower spray arm.
Using a sharp pointed object push
the food particles into the jets and
rinse well under running water. Food
particles should be pushed into the
jets using a sharp pointed object
and then the spray arms rinsed well
under running water.
Please note:
After replacing the spray arms check
that they move freely.
Cleaning and care
35