Operation
56
Interrupting a program
A program will be interrupted as soon
as the door is opened.
Close the door and press the Start
sensor button.
The program will continue from the
point at which it was interrupted.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Canceling or changing a pro-
gram
If a program is canceled, important
program stages may be missed.
A program should only be canceled
in the first few minutes.
If a program has already started and
you wish to cancel it, proceed as fol-
lows:
Turn the dishwasher off using the
sensor button.
Confirm the query Turn appliance off
with OK.
If you would like to select another pro-
gram:
Turn the dishwasher back on using
the sensor button.
If you have dispensed detergent
manually, check whether the deter-
gent compartment is still closed.
If the lid is already open, fill it with de-
tergent again and close the lid.
Select the program you want, and
then start it.
To Next Page
Loading...
