Operation
45
3. Program chart
The PROGRAMME-SURVEY menu lists all stored programs.
Select the PROGRAMME-SURVEY menu option with and
confirm with .
Select the program with or and confirm with .
This exits the program chart, and the selected program is shown in
the display.
Press the Start button .
The program will run.
For further information on program selection see "Operating Level B"
in the Programming manual.
Operating level C
Make sure that no small metallic objects or instrument parts are
stuck to the magnetic strip, in particular to the underside of it.
Any metallic objects on the strip can result in the coding being
incorrectly read.
Before starting a program by pressing the Start button it is
absolutely essential to check that the program required for this
wash cart is the one shown in the display.
Otherwise inadequate cleaning or disinfection could be the result.
Please make sure, that the places assigned for the programs using
automatic program recognition are not changed around arbitrarily.
Open the door.
Push the coded wash cart into place in the washer-disinfector.
Close the door.
Check that the correct program is displayed and press to start.
The program will run.
D: Open program
selection
Select the PROGRAMME-SURVEY menu option with and
confirm with .
Select the program with or and confirm with .
This exits the program chart, and the selected program is shown in
the display.
Press the Start button .
The program will run.
To Next Page
