Miele G 7860 - Cleaning the spray arms

Cleaning the spray arms
Waste particles can lodge in the spray
arm jets.
It is therefore important to inspect the
spray arms regularly.
^
Use a sharp pointed object to push
particles into the spray arm jets and
rinse well under running water.
Remove the spray arms as follows:
^
Unscrew the upper spray arm.
^
Remove the middle spray arm by
unscrewing the nut
which secures it
to the upper basket.
Important:
The nut has a left hand
thread and has to be turned
clockwise to unscrew it.
^ Loosen the knurled thumb nut to
unscrew the lower spray arm.
You will first need to take the bottom
basket out of the machine.
Important:
After replacing the spray arms, check
that they rotate freely.
Cleaning and care
40