After sales service
Important:
When a fault first occurs, please check
that the fault has not been caused by
incorrect operation. This will help avoid
an unnecessary service call-out. To do
this:
^
Turn the programme selector to the
STOP position f (the fault code goes
out).
^
Switch the machine off (press I-0).
^
Switch the machine on again and
reselect the programme.
If you still have difficulties or if a fault
code "F..." appears in the display,
please contact your authorised Service
Dealer or the Miele Service
Department. See back cover for
addresses.
Please quote the fault code as well as
the model type and number of your
machine which is given on the data
plate (see "Electrical connection").
Correcting minor faults
44
To Next Page
