Cleaning the water inlet filters
To protect the water inlet faucet, filters
are incorporated in the intake hose
attached to the water supply. If the
filters are soiled they must be cleaned
to ensure sufficient water intake to the
wash cabinet.
,
The plastic housing of the water
connection contains electrical
components and should not be
submerged or run through water.
Cleaning the filters
^
Disconnect the machine from
electricity (unplug it or "trip" the
circuit breaker).
^
Close the water supply and unscrew
the water inlet faucet.
^
Carefully remove the rubber seal.
^
Take out the filters with needle nose
pliers.
^
Rinse the large area filter 1 and fine
filter 2 under running water, and
replace if necessary.
^
Return filters and seal. Make sure
they are seated correctly.
^
Reconnect the hose to the water
faucet, checking that it is not
cross-threaded.
^
Open the water supply.
^
Check for leaks.
Cleaning and Care
51
To Next Page
