Problem solving guide
102
Fault messages
Problem Cause and remedy
The optical in-operation
indicator light is flash-
ing quickly.
The alarm tone is
sounding.
One of the following
faults appears in the
display:
Before rectifying the problem:
Switch the dishwasher off.
Fault F XX: A fault has
occurred; switch the appli-
ance off and back on again.
Restart the programme. If
the fault occurs again, call
Miele Service
There may be a technical fault.
Switch the dishwasher back on after a few
seconds.
Select the programme you want to use.
Close the door.
If the fault message appears again, there is a tech-
nical fault.
Switch the dishwasher off.
Close the stopcock.
Call the Miele Customer Service Department.
Waterproof fault: Switch
the appliance off, close the
stopcock, call Miele Service.
The Waterproof system has reacted.
Switch the dishwasher off.
Close the stopcock.
Call Miele Service.
Fault F 78: A technical
fault has occurred. Switch
the appliance off, close the
stopcock and call Miele Ser-
vice.
Circulation pump fault.
Switch the dishwasher off.
Switch the dishwasher back on.
Select the programme you want to use.
Close the door.
If the fault message appears again, there is a tech-
nical fault.
Switch the dishwasher off.
Close the stopcock.
Call the Miele Customer Service Department.
To Next Page
