Miele G 7969 - Remote Control

Settings
40
Reset network configuration?
This menu option only appears if you
have connected your dishwasher to
your Wi-Fi network before.
You can use this menu option to reset
all Wi-Fi module settings to the factory
default settings.
The network configuration should be
reset whenever a dishwasher is being
disposed of or sold, or if a used
dishwasher is being put into operation.
This is the only way to ensure that all
personal data has been removed and,
in the case of the latter, a previous
owner will no longer be able to access
the dishwasher.
 Select the Reset network configuration?
menu option.
 Select the Yesoption and confirm
with OK.
Remote control
This menu option will only be
displayed if you have connected your
dishwasher to your Wi-Fi network (see
“Settings - Miele@home”).
If you wish to permanently switch off
the Remote control option, you can do
this under this menu option. The
sensor will then no longer be
available to select until you change this
setting again.
Even if the Remote control option is
switched off, you can use the Miele App
to call up information about your
appliance. However, you cannot start
any programmes or change any
settings from it.