Miele G 7969 - Page 80

Options
80
Setting “Start at”
With the Start at function, you set the
exact time at which you want the
programme to start.
 Set the hour with the sensors.
 Touch the minute number block.
 Use the sensors to enter the
minutes and confirm your entry with
OK.
The saved start time for the selected
programme will appear in the display for
several minutes.
 Close the door.
When the set time is reached, the
selected programme will start
automatically.
Setting “Finish at”
Use the Finish atfunction to set the
latest time by which the selected
programme has to be finished.
 Set the hour with the sensors.
 Touch the minute number block.
 Use the sensors to enter the
minutes and confirm your entry with
OK.
The estimated start time for the
selected programme will appear in the
display for several minutes.
A message will appear in the display if
the programme cannot be completed
by the set finish time because it has too
long a running time.
 In this case confirm the message with
OK.
 Close the door.
The programme will start automatically
when the estimated start time is
reached.