Operation
49
End of program
The program has ended when the dis-
play shows the message Ready.
In some programs, if the AutoOpen
function is activated, the door will auto-
matically open slightly (see “AutoOpen”
under “Settings”). This improves the
drying process.
The drying fan may continue to run for
a few minutes at the end of the pro-
gram.
Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate coun-
tertops when you open the door at
the end of the program if the blower
is no longer running.
If you have deactivated the auto-
matic door-opening function (see
“AutoOpen” under “Settings”), but
would still like to open the door at
the end of the program, then make
sure that you open the door fully.
Energy management
To save energy, the dishwasher will
switch off automatically 10minutes af-
ter the last time a button is pressed or
after the end of a program.
You can turn the dishwasher back on
again with the button.
The dishwasher will not turn itself off
while a program is running or if there is
a fault.
To Next Page
Loading...
