Miele G7106 - Page 53

Options
53
After you have activated the timer, all
the displays will turn off after a few
minutes to save energy.
Press the button to switch the dis-
play back on again for a few minutes.
The time up until the program starts will
count down in the display in hours for
durations above 10hours, and in min-
utes for durations below 10hours.
At the end of the delay period, the pro-
gram selected begins automatically.
The time left will appear in the display
and the Timer indicator light will go
out.
How the time for the timer is shown
in the display:
Up to 59minutes:
e.g., 30minutes=:
1hour up to 9hours 30minutes:
e.g., 5hours=:
Over 10hours:
e.g., 15hours=
Starting a program before the time
for the timer has elapsed:
A program can be started before the
time for the timer has elapsed.
Proceed as follows:
 Turn the dishwasher off with the
button.
 Turn the dishwasher on again with the
button.
 Select the program you want.
 Press the Start button.
The program starts. The Start indicator
light will come on.