^
Clean the glass panes and other
parts and then put the oven door
back together again.
^ Push the middle pane into the frame
almost to the end. The material (M-)
number printed on the pane must be
legible in the bottom right hand
corner (see illustration). Fit the
sealing strip into position, then push
the pane in as far as it will go.
^
Fit the side seals for the inner pane in
the grooves provided.
^
Insert the inner pane with the printed
text facing downwards.
Be careful that the side seals do not
slip and that the pane is pushed in as
far as possible.
Cleaning and care
65
To Next Page
