Starting a pyrolytic process
FAN PLUS
ALL FUNCTIONS . . .
CONVENTIONAL AUTOMATIC . . .
GRILL full USER PROGS . . .
PYROLYTIC SETTINGS F...
^
Select PYROLYTIC.
PYROLYTIC
12:05
Please remove accessories and then start
START
Min minder
Duration
^
Take all accessories out of the oven.
^ Then press the multi-function selector to start the cleaning
programme.
The appliance door will lock.
You can delay the start of the pyrolytic process for
example, to take advantage of cheaper night electricity tarifs.
To do this:
^ Call up "Start time" and select a time to start the
programme at.
You can change the start time if you wish at any time up until
the delay period has elapsed.
At the end of the programme a buzzer will sound and the
message "Programme finished" will appear in the display.
^
Switch off the oven.
After the pyrolytic process any debris (e.g, ash), can easily
be wiped away.
Remember to wait until the oven has cooled down before
doing so! Danger of burning!
Try not to wipe over the fibre-glass seal when cleaning the
oven cavity. It is particularly sensitive and should not be
cleaned unless absolutely necessary. Rubbing it can
damage it.
Cleaning and care
58
To Next Page
Loading...
