Catalyser
The level of odour reduction is
represented by a bar with seven
segments.
P G G G G G GM
Maximum odour reduction is selected
when all segments are filled.
If none of the segments are filled the
catalyser is switched off.
^
Select "min." or "max." to change the
level of odour reduction.
^
Select "On" or "Off" to switch the
catalyser on and off.
Showroom programme
This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Demo mode
–
On
Touch the sensor next to "OK" for at
least 4 seconds to activate demo
mode.
If activated, the message "Demo
mode active. The appliance will not
heat up" will appear in the display
when the oven is switched on.
–
Off
Touching the sensor next to "OK" for
at least 4 seconds will deactivate
Demo mode. You can then use the
oven as normal.
Factory default
–
Settings
Any settings that you have altered
will be reset to the factory default
setting.
–
User programmes
All user programmes will be deleted.
– Recommended temperatures
Recommended temperatures which
have been changed will be reset to
the factory default settings.
Settings
47
To Next Page
Loading...
Need help?
General
