Miele HM 16-80 User Manual

Shirts
^
Remove the feed board to iron shirts.
1. Shoulder yoke
^ Arrange the yoke, collar first, on the
roller and smooth out.
^ Hot press the yoke.
2. Collar
The collar is ironed on both sides using
the left hand end of the roller. Stop
ironing when the button comes to the
heater plate.
^
Then turn down the collar and press
lightly, holding taut.
3. Front sides
^ Lay the button hole front on the left
hand end of the roller with the side
seam along the edge of the roller.
^ Iron from the button hem up to the
armhole.
^ Now move the shirt out and iron past
the armhole to the side seam.
^
Iron the button side inside out so the
buttons are pressed into the
cushioned surface of the roller.
Ironing Tips
25

Miele HM 16-80 Specifications

General

Roller diameter	16 cm
Roller width	83 cm
Heater plate material	Aluminium
Variable roller speed	Yes
Folding	Yes
Finger guard	Yes
Automatic finger guard	Yes
Auto shut-off	Yes
Heating type	Electric
Dimensions when open (H x W x D)	95 x 98 x 38 cm