Before building the appliance in decide
on the door hinging. If left hand door
hinging is required follow the
instructions below.
Appliance door
^
Loosen screws a in the top and
bottom hinges.
^
Remove the appliance door.
^
Unscrew the hinges from the
appliance door b, take the stoppers
c out of the appliance door, and refit
the hinges on the diagonally opposite
side.
^
Tighten the hinges on the appliance
door and fit the stoppers in the free
holes.
^
Take the stoppers out of the
appliance housing and unscrew the
screws in the appliance housing.
Refit on the opposite sides.
^
Refit the appliance door onto the
screws and tighten the screws.
^
Fit hinge covers.
Freezer compartment door
^ Remove plugs a.
^ Unscrew cover piece b.
^
Unscrew the freezer compartment
door c, turn it around and refit it on
the opposite side.
^
Remove plugs d and fit cover piece
b into this position.
^
Cover the holes with the plugs.
Changing the door hinging
31
To Next Page
Loading...
