Converting to another gas type
*
I
N
S
T
A
L
L
A
T
I
O
N
*
60
Wok burner
b
Small jet with smaller diameter
(e.g. for LPG:0,27)
c
Small jet with larger diameter
(e.g. for LPG:0,52)
Remove the ignition switch.
Using a small screwdriver, unscrew
the two small jetsin the gas fitting.
Pull out the jets with a pair of pliers.
Fit the correct jets securely (see jet
table).
Secure the jets against inadvertent
loosening with sealing wax.
Functional check
Check all gas fittings for leaks.
Reassemble the hob.
Ignite all burners to check that they
are operating correctly.
– The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
– On the highest setting, the flame
must have a distinctive and visible
core.
Adhere the label supplied with the
jets, stating the type of gas being
used.
To Next Page
Loading...
