Miele KM 320 - Page 9

Changing the needle valves
Normal/Fast burner
^ Remove the ignition switch, a.
^ Loosen the needle valve, b, with a
screwdriver and remove with a pair of
pliers.
^
Install the new needle valve
according to the conversion table
and tighten.
Wok burner
^ Remove the ignition switch, a.
^ Loosen the small, b, and large, c,
needle valves with a screwdriver and
remove them with a pair of pliers.
^
Install the new needle valves
according to the conversion table
and tighten.
Converting KM 342 / 344
9
a
b