... one of the following has occured:
–
The booster has automatically
switched off early.
–
The set power setting of 9 flashes
alternately in the display with 8.
–
A 0 flashes in the display for all
zones.
The overheating protection mechanism
has been triggered (see "Overheating
protection").
... the food in the pan hardly heats up
or does not heat up at all when the
Auto heat-up function is switched on
This could be because:
– there is too much food in the pan.
– the pan is not conducting heat
properly.
Select a higher continued cooking
setting next time, or start cooking at the
highest setting and then turn down to a
lower setting manually later on.
... The cooling fan continues to run
after the appliance has been
switched off
This is not a fault. The fan will continue
running until the appliance has cooled
down. It will then switch itself off
automatically.
Problem solving guide
34
To Next Page
Loading...