Never open the casing of the
appliance.
Tampering with electrical connections
or components is highly dangerous to
the user and can cause operational
faults.
On hobs with bevelled glass edges
a small gap may be visible
between the hob and the worktop
during the first few days after
installation. This gap will reduce with
time as the appliance is used and will
not affect the electrical safety of your
appliance.
Correct usage
For safety reasons this appliance
must only be operated after it has
been built in. This is necessary to
ensure that all electrical components
are shielded.
This appliance is intended for
domestic use only and is not to be
used for commercial purposes.
If the hob is built in over a pyrolitic
oven, the hob should not be used
whilst the pyrolitic process is being
carried out, as this could trigger the
overheating protection mechanism on
the hob (see relevant section).
Use this appliance for the
preparation of food only. Any other
usage is at the owner's risk and could
be dangerous. The manufacturer
cannot be held liable for damage
resulting from incorrect or improper use
or operation.
Warning and Safety instructions
7
To Next Page
Loading...
Need help?
General
