Sensors for
a Switching the hob on and off
b Numerical keypad
- For setting the power level
- For setting the time
c Safety lock
d Switching on the outer circle of a double circle/extended zone (depending on
model)
e Selecting the cooking zone
f Stop and Go
g - Selecting the timer
- Switching between the timer functions
- Selecting the switch off time (see "Switching off a cooking zone automatically")
h Hour function
Indicator lamps
i Safety lock
j Outer circle of a double circle/extended zone switched on
Cooking zone displays
k
0 = Cooking zone ready for use
1 to 9 = Power levels
# = Residual heat
A = Auto heat-up when the power level range has been extended
l Indicator lamp for Auto heat-up or extended power setting (see "Programming")
Timer display
m Indicator lamp for relevant zone, e.g. the rear right cooking zone
n
00 to 99 = Time in minutes
0.^ to 9^ = Time in hours
PS = Programming (see "Programming")
F = Fault (see “Safety switch-off”)
o Indicator lamp for half hours with a minute minder time of more than 99 minutes
Guide to the appliance
9
To Next Page
Loading...
