To Next Page
A
Andrew MartinezSep 12, 2025
What does FE 44 mean on my Miele KM 6310 Cooktop?
- JJennifer HowardSep 12, 2025
If you are getting fault message FE 44 on your Miele cooktop, it indicates that the overheat protection was triggered.
What does FE 44 mean on my Miele KM 6310 Cooktop?
If you are getting fault message FE 44 on your Miele cooktop, it indicates that the overheat protection was triggered.
What do other FE fault messages mean on my Miele Cooktop?
If you are seeing other fault messages FE.. on your Miele cooktop, there might be a fault in the electronics. Interrupt the power supply for about 1 minute. If the problem continues after reconnecting, contact Miele Customer Service.
General| Number of Cooking Zones | 4 |
|---|---|
| Number of burners | 4 |
| Material | Ceramic Glass |
| Type | Induction |
| Control Type | Touch controls |
| Safety Features | Child lock, automatic switch-off, residual heat indicator |
| Frame type | Stainless steel |
| Burner power levels | 1.4 - 3.7 kW |
Explains the functions and indicators of the cooktop's control panel.
Provides safety guidelines for children around the appliance.
Covers safety aspects related to installation, repair, and electrical connections.
Details safe operating procedures and potential fire/damage risks.
Explains the principle of induction heating for the cooktop.
Details on activating and deactivating the safety and system locks.
Information on automatic shut-off due to long cooking times or covered sensors.
Explains the overheat protection measures for induction coils and cooling elements.
