Need help?Do you have a question about the Miele KM 6325-1 and is the answer not in the manual?
General| Appliance type | Hob |
|---|---|
| Number of Cooking Zones/Burners | 4 |
| Boost Function | Yes |
| Frame | Stainless Steel |
| Burner types | Induction |
| Safety Features | Overheating protection |
| Ignition type | Not applicable |
| Material | Glass Ceramic |
Details the intended domestic use and restrictions for the cooktop.
Provides crucial safety advice regarding children's interaction with the appliance.
Covers safety aspects related to installation, repair, and electrical connections.
Explains how to use the cooktop safely and prevent hazards.
Details safe cleaning practices and agents to avoid damaging the appliance.
Information on environmentally friendly disposal of packaging materials.
Guidance on the proper and safe disposal of old electrical appliances.
Identifies and describes the components of the KM 6325-1 cooktop model.
Identifies and describes components of specific cooktop models.
Explains the meaning of various symbols used on the control panel.
Explains the meaning of symbols displayed on the cooktop interface.
Provides detailed specifications and power ratings for cooking zones of KM 6325-1.
Provides specifications and power ratings for cooking zones of KM 6362-1, KM 6363-1, KM 6364-1.
Instructions for initial cleaning of the cooktop before first use.
Steps for safely turning on the cooktop for the very first operation.
Explains the fundamental working principle of induction cooking technology.
Describes common sounds that may occur during induction cooking operation.
Details suitable and unsuitable types of cookware for induction cooktops.
Instructions on how to use the rotary controls for cooking zones.
Step-by-step guide to turning on a cooking zone.
Step-by-step guide to turning off a cooking zone.
Explains the function and meaning of the residual heat indicator.
Details on combining and operating PowerFlex cooking zones.
Instructions for activating and deactivating the automatic heat-up function.
Information on the Booster function, its activation and limitations.
Guidance on using the keeping warm function for food.
Instructions on how to activate and deactivate the child lock system.
Details the automatic safety switch-off mechanism for cooking zones.
Explains the overheating protection mechanism and its causes.
Lists cleaning agents that should not be used to avoid appliance damage.
Detailed instructions for cleaning the ceramic glass surface safely and effectively.
Guidance on cleaning the rotary controls of the cooktop.
Troubleshooting steps for issues with switching on the cooktop or zones.
Troubleshooting for cooking zones that switch off unexpectedly.
Troubleshooting for premature deactivation of the Booster function.
Troubleshooting for 'F' error message in cooking zone displays.
Troubleshooting steps when the rotary control is not set to '0'.
Information on recommended cleaning and care products for the appliance.
Details on Miele's range of compatible cookware for cooktops.
Instructions for connecting the cooktop to the Con@ctivity system.
Specifies required clearances above the cooktop for safety.
Specifies required horizontal clearances around the cooktop.
Specifies required vertical clearances below the cooktop for ventilation.
Important notes regarding the installation of cooktops with frames or bevelled edges.
Technical drawings and dimensions for installing the KM 6325-1 cooktop.
Technical drawings and dimensions for installing the KM 6362-1 cooktop.
Technical drawings and dimensions for installing the KM 6363-1 cooktop.
Step-by-step guide for installing cooktops with frames or bevelled edges.
Specific notes for installing flush-fitted cooktops in various worktop types.
Technical drawings and dimensions for installing the KM 6364-1 flush-fitted cooktop.
Installation details for flush-fitted cooktops in granite and marble.
Installation details for flush-fitted cooktops in wood, tile, and glass.
Details on power supply requirements, isolator switches, and wiring.
Recommendation for using an RCD for enhanced electrical safety.
Information on the required type and specifications for the mains connection cable.
Instructions and safety precautions for replacing the appliance's power cable.
Provides electrical wiring diagrams for connecting the appliance.
Guidance on contacting Miele for support and fault resolution.
Information on locating and using the appliance's data plate.
Details on the manufacturer's warranty period and further information.
To Next Page
