EasyManua.ls Logo

Miele KM 6381 User Manual

Miele KM 6381
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating and installation instructions
Ceramic hobs with induction
To avoid the risk of accidents or damage to the appliance it is essential
t
o read these instructions before it is installed and used for the first time.
en-GB M.-Nr. 10 023 450
Question and Answer IconNeed help?

Do you have a question about the Miele KM 6381 and is the answer not in the manual?

Miele KM 6381 Specifications

General IconGeneral
TypeInduction Hob
Number of Cooking Zones/Burners4
Control TypeTouch Control
Power Levels9
Boost FunctionYes
FrameStainless Steel
IgnitionAutomatic
MaterialCeramic Glass
Safety FeaturesChild Safety Lock

Summary

Warning and Safety Instructions

Correct Application

Outlines intended use and restrictions for safe operation.

Safety with Children

Crucial advice for preventing accidents involving children around the hob.

Technical Safety Aspects

Covers installation, maintenance, and electrical safety by qualified personnel.

Proper Usage Guidelines

Details proper usage to avoid hazards like burns, fires, or damage.

Cleaning and Care Precautions

Advises on safe cleaning methods, warning against steam cleaners and unsuitable chemicals.

Appliance Overview

Controls and Indicators Explained

Explains sensor controls, indicator lights, and displays on the hob's control panel.

Before First Use Procedures

Induction Technology Explained

Hob Operation and Features

Basic Controls and Switching

Explains hob operation via sensor controls, including switching on/off.

Zone and Power Level Management

Details switching zones on/off and adjusting power levels for precise cooking.

Safety Mechanisms

Safety Switch-Off Features

Details safety switch-off for overlong cooking times and covered sensors.

Overheating Protection System

Describes the overheating protection mechanism preventing damage from excessive heat.

Cleaning and Maintenance

Troubleshooting Common Issues

Hob Not Switching On

Addresses failure to switch on and provides troubleshooting steps.

Installation Safety and Guidelines

General Installation Safety

Outlines safety precautions and preparation before installation, including electrical compliance.

Required Safety Clearances

Specifies safety clearances above, to sides, and underneath the hob for safe installation.

Hob with Frame/Bevelled Edge Installation

Flush-Fitted Hob Installation

Electrical Connection Guide

Connection Specifications

Details voltage, frequency, and safety device requirements (RCD) for connection.

Mains Cable and Wiring Codes

Covers mains cable specs and wiring colour codes for proper electrical hook-up.

Wiring Diagrams

Presents diagrams illustrating correct wiring configurations for connecting the hob.

Related product manuals