Need help?Do you have a question about the Miele MasterCool K 2901 Vi and is the answer not in the manual?
General| Brand | Miele |
|---|---|
| Model | MasterCool K 2901 Vi |
| Category | Refrigerator |
| Language | English |
Appliance is heavy and can tip forwards when door is open. Keep door shut until built-in and secured.
Intended for domestic use in households and similar environments, not outdoors or in damp areas.
Keep children away from appliance, dispose of packing material safely. DANGER of suffocation!
Ensure correct grounding, use appropriate power supply, avoid moisture and extension cords.
Designed for specific climate range; avoid low ambient temperatures like garages.
Install in a dry, well-ventilated room, avoid heat sources and direct sunlight. Ensure electrical outlet is accessible.
Keep ventilation gaps clear and clean to prevent overheating, increased energy consumption, and damage.
Provides overall height, width, and depth dimensions for these models.
Provides overall height, width, and depth dimensions for these models.
Provides overall height, width, and depth dimensions for these models.
Shows the required dimensions for the cabinet front panel for these models.
Shows the required dimensions for the cabinet front panel for these models.
Shows the required dimensions for the cabinet front panel for these models.
Read instructions carefully, installation by qualified tradesman, appliance is heavy and needs two people.
Niche must be aligned with a level, corners at 90°, walls and baseboard have specific thickness requirements.
Appliance is heavy, check for damage, ensure rear parts are unhindered, protect floor.
Niche must be secured to the wall with screws and anti-tip brackets to prevent tipping.
Use anti-tip brackets to fix niche to wall, ensure gap between appliance and niche does not exceed 2" (51 mm).
Push appliance carefully, connect plug, avoid short circuits, secure power cord.
Align appliance with cabinet fronts using installation aids for different cabinet front thicknesses.
Secure appliance using lugs for fixing plates or side fixing plates.
Insert angle trims, hang cabinet front onto threaded bolts, press and screw angle trims.
Grounding, correct voltage, dedicated circuit, accessible outlet, no extension cords, qualified electrician.
Insert plug into appliance and outlet, ensure it clicks, then switch on.
Allow appliance to stand, remove packaging, clean interior, choose Door Assistant.
Turn on appliance, set language, temperature unit, and Miele@home.
Open door, press On/Off switch, allow appliance to cool before storing food.
Check appliance for faults or malfunctions. Error messages will be displayed.
Touch temperature symbol, use sensors to adjust, confirm setting.
Rapidly reduce fridge zone temperature for fast chilling of large food amounts.
Check if appliance is on, plug is connected, fuse is ok; perform Self Test.
Addresses frequent compressor cycling, low temperature, or continuous operation.
Contact Miele dealer or Technical Service, provide model and serial number.
To Next Page